|
|
GENERAL
SPECIFICATIONS
MODEL 2310™ DIGITAL SINGLE CYLINDER SCALE
Previous
Page |
| INDICATOR: |
3-1/2
Digit |
Model
1099™ |
| POWER: |
85
VAC to 265 VAC |
| PLATFORM
HEIGHT: |
1-1/2
inch high (41 mm)) |
| ACCURACY: |
| 0.5%
of full scale capacity |
0.25%
of full scale capacity |
|
| GROSS
CAPACITY: |
349
lb. (158 kg) |
| RESOLUTION: |
0.1
lb. (kg) to 199.9 lb |
0.1
lb. (kg) to scale capacity |
| 4-20mA: |
Standard
(scale or loop powered) |
Standard
on Channel 1,
(optional for Channels 2-4)
Loop Powered |
LEVEL
INDICATING/
RELAY CONTACTS: |
Optional
Low Level Reed
Relay contact(s) |
Optional
- Up to 4 (as High, Low or Control)
available on one channel, or more than
one per channel for a total of 4 set points
with Relay contact |
| ENCLOSURE: |
NEMA
4x, UL Approved enclosure |
| SHIPPING
WT: |
22
lb. |
22
lb. |
| PLATFORM
SIZE: |
15-3/4
inch (400 mm) wide, 17-1/2 inch (444 mm) length |
|
|
|
STANDARD EQUIPMENT
a. Scale base
b. Electronic indicator housed in NEMA 4x, UL approved enclosure
c. Stainless steel temperature compensated strain gauge transducers
d. Self-locking tare adjustment knob
e. Cylinder support and chain
f. 4-20 mA output - scale or loop powered
g. 12 ft. of 4 conductor wire cable
OPTIONS
a. Low level relay contact
b. Remote mounting of indicator box
c. Additional length of 4 conductor wire cable
d. Model 1099™ Chemical Process Controller |
|
 TYPICAL
SPECIFICATIONS
Scale must weigh 150 lb. cylinder. The accuracy must be at
least 0.5% with cylinder placed anywhere on the platform.
Digital readout must be an LCD Display with characters that
are 0.5 inches high, with 0.1 lb. or 0.1 kg. resolution. Indicator
is required to have 4-20mA output selectable as scale powered
or loop powered, standard. Indicator must have a knob to set
tare weight. The electronics must be housed in a NEMA 4X,
UL approved enclosure. All base hardware must be stainless
steel. The cross bar shall be coated with dry powder polyester
plastic. The entire base must be PVC to prevent corrosion.
To use
a Model
1099™ Chemical Process Controller with this Model
2310™ Single Cylinder base, see individual Model 1099™
literature sheet for typical specifications.
The scale
shall be a MODEL 2310™ as manufactured by Scaletron Industries
Ltd., Plumsteadville, PA.
|
5
year FULL warranty on ALL products.
Design improvements may be made without notice.
©2005 Scaletron Industries Ltd., Plumsteadville, PA Scaletron,
Scaletron Sets The Standard In Corrosion Resistance, Model
1099,
Model 2310, Model 2330, Model 2350, Model 2352-2353, Model
3001, Model 3002, Model 3003, Model 3004, Model 3005, Model
3006,
Model 3050, Model 4010, Model 4020, Model 4021, Model 4030,
Model 4040, Model 4040 IBC, Model 4041 and Model 5305 are
trademarks
of Scaletron Industries Ltd. Total Electronic System is a service
mark of Scaletron Industries Ltd. |
|
