|
|
GENERAL
SPECIFICATIONS
MODEL 2350™ DIGITAL DUAL CYLINDER SCALE
Previous
Page |
| INDICATOR: |
3-1/2
Digit |
Model
1099™ |
| POWER: |
85
VAC to 265 VAC |
| PLATFORM
HEIGHT: |
1-1/2
inch high (41 mm)) |
| ACCURACY: |
| 0.5%
of full scale capacity |
0.25%
of full scale capacity |
|
| GROSS
CAPACITY: |
349
lb. (158 kg) |
| RESOLUTION: |
0.1
lb. (kg) to 199.9 lb |
0.1
lb. (kg) to 349.9 lb |
| 4-20mA: |
Standard
(scale or loop powered) |
Standard
on Channel 1,
(optional for Channels 2-4)
Loop Powered |
LEVEL
INDICATING/
RELAY CONTACTS: |
Optional
Low Level Reed
Relay contact(s) |
Optional
- Up to 4 (as High, Low or Control)
available on one channel, or more than
one per channel for a total of 4 set points
with Relay contact |
| ENCLOSURE: |
NEMA
4x, UL Approved enclosure |
| SHIPPING
WT: |
27
lb. (base & indicator)
15 lb. (post) |
27
lb. (base & indicator)
15 lb. (post) |
| PLATFORM
SIZE: |
32
inch (815 mm) wide, 18 inch (457.2 mm) length |
|
|
|
|
STANDARD
EQUIPMENT
a. Dual scale base
b. Electronic indicator housed in NEMA 4x, UL approved enclosure
c. Two liquid crystal displays, one per each cylinder
d. Stainless steel temperature compensated strain gauge transducers
e. Self-locking tare adjustment knobs
f. Cylinder support and chains
g. 4-20 mA output - scale or loop powered
OPTIONS
a. 2 Low level relay contacts
b. Remote mounting of indicator box
c. Additional length of 8 conductor wire cable
d. Model 1099™ Chemical Process Controller
|
|
 TYPICAL
SPECIFICATIONS
Scale must weigh two 150 lb. cylinders. The accuracy must
be at least 0.5% with cylinders placed anywhere on the platform.
Digital readout must be an LCD Display with characters that
are 0.5 inches high, with 0.1 lb. or 0.1 kg. resolution. Indicator
is required to have 4-20mA output selectable as scale powered
or loop powered for each readout, standard. Indicator must
have a knob to set tare weight for each readout. The electronics
must be housed in a NEMA 4X, UL approved enclosure. All base
hardware must be stainless steel. The post and cross bar shall
be coated with dry powder polyester plastic. The entire base
must be molded fiberglass reinforced thermoplastic construction
to prevent corrosion.
To use
a Model
1099™ Chemical Process Controller with this Model
2350™ Dual Cylinder base, see individual Model 1099™
literature sheet for typical specifications.
Scale
shall be a MODEL 2350™ as manufactured by Scaletron Industries
Ltd., Plumsteadville, PA.
|
5
year FULL warranty on ALL products.
Design improvements may be made without notice.
©2005 Scaletron Industries Ltd., Plumsteadville, PA Scaletron,
Scaletron Sets The Standard In Corrosion Resistance, Model
1099,
Model 2310, Model 2330, Model 2350, Model 2352-2353, Model
3001, Model 3002, Model 3003, Model 3004, Model 3005, Model
3006,
Model 3050, Model 4010, Model 4020, Model 4021, Model 4030,
Model 4040, Model 4040 IBC, Model 4041 and Model 5305 are
trademarks
of Scaletron Industries Ltd. Total Electronic System is a service
mark of Scaletron Industries Ltd. |
|
