|
|
GENERAL
SPECIFICATIONS
MODEL
3001™ - 3006™ DIGITAL TON CYLINDER SCALE
Previous
Page
|
| INDICATOR: |
4-1/2
Digit |
Model
1099™ |
| POWER: |
120
VAC, 50/60 Hz, 0.3 A
240 VAC, 50/60 Hz, .15 A |
85
VAC to 265 VAC |
| PLATFORM
HEIGHT: |
8-1/2
inch (216 mm) from floor to top of 3 inch UHMW roller
9 inch (229 mm) from floor to top of 4 inch UHMW roller |
| ACCURACY: |
0.5%
of full scale |
0.1%
to .25% of full scale |
| GROSS
CAPACITY: |
4000
lb. (1814.4 kg) for each ton platform |
| RESOLUTION: |
0.1
lb. (kg) to full scale capacity |
| 4-20mA: |
Standard
(scale or loop powered) |
Standard
on Channel 1,
(optional for Channels 2-4)
Loop Powered |
LEVEL
INDICATING/
RELAY CONTACTS: |
Two
Low Level REED
Relay contact(s) |
Optional
- Up to 4 (as High, Low or Control)
available on one channel, or more than
one per channel for a total of 4 set points
with Relay contact |
| ENCLOSURE: |
NEMA
4x, UL Approved enclosure |
| SHIPPING
WT: |
110
lbs. |
110
lbs. |
| PLATFORM
SIZE: |
45-1/2
inches (1156 mm) length (greatest length)
24-1/4 inches (508 mm) wide (greatest width) |
|
|
|
|
STANDARD
EQUIPMENT
a. Scale base
b. Electronic indicator housed in NEMA 4x, UL approved enclosure
c. NTEP stainless steel temperature compensated strain gauge
transducer
d. Self-locking tare adjustment knob
e. Trunnions with UHMW polyethylene rollers on stainless steel axles
for ease of turning
f. 4-20 mA output - scale or loop powered
g. 2 Low level relay contacts
h. Each cylinder has its own load cell
i. 20 ft. of 4 conductor wire cable
OPTIONS
a. 240 VAC power for 4½ digital display
b. Remote mounting of indicator box
c. Additional length of 4 conductor wire cable
d. Model 1099™ Chemical Process Controller
|
|
 TYPICAL
SPECIFICATIONS
Ton Cylinder Scale must be smaller than the cylinder and tilt
up for cleaning and inspection. There must be a provision
for securing weigh frame to floor. The profile shall be ultra
low so as not to require a pit. There must be means to level
the frame built into the scale frame. The load cell must be
NTEP approved Stainless Steel shear beam cell with a built-in
mechanical overload stop to protect it from damage during
rough cylinder loading. The frame must be dry powder polyester
plastic coated. The trunnions shall be corrosion proof with
UHMW polyethylene rollers, requiring no maintenance or greasing.
Axles shall be made of stainless steel.
Scale shall be a Model 300__™ as manufactured by Scaletron
Industries Ltd., Plumsteadville, PA.
Standard
Indicator:
Indicator must be electronic with digital display with characters
0.56 inches high and housed in a NEMA 4X, UL approved enclosure.
An output of 4-20mA, 0-20mA, or -8 to +12mA, selectable as
scale or loop powered to provide versatility to interface
with related equipment, must be standard equipment. Indicator
comes with two low level relay contacts standard. A
knob to set tare weights is required. Indicator must be capable
of 0.1 lb or 0.1 kg up to 1000.0 lb or kg. Accuracy is 0.5%
of full scale, or better.
Optional
Indicator:
Model 1099™ Chemical Process Controller see separate
specification
|
|
|
5
year FULL warranty on ALL products.
Design improvements may be made without notice.
©2005 Scaletron Industries Ltd., Plumsteadville, PA Scaletron,
Scaletron Sets The Standard In Corrosion Resistance, Model
1099,
Model 2310, Model 2330, Model 2350, Model 2352-2353, Model
3001, Model 3002, Model 3003, Model 3004, Model 3005, Model
3006,
Model 3050, Model 4010, Model 4020, Model 4021, Model 4030,
Model 4040, Model 4040 IBC, Model 4041 and Model 5305 are
trademarks
of Scaletron Industries Ltd. Total Electronic System is a service
mark of Scaletron Industries Ltd. |
| |
|
