Model 4000SS™ Gas Cabinet, Dewar & Cylinder Scale Specifications
5 year FULL warranty on ALL products!
|Indicator/Controller:||3-1/2 Digit||4-1/2 Digit||1020™ 5 Digit||1099™C.P.C.|
|Platform Size:||24”x24”x1-3/4” (609.6 mm x 609.6 mm x 44.5 mm), 30”x30” x1-3/4” (762 mm x 762 mm x 44.5 mm) – custom sizes available|
|Platform Height:||1” (25.4 mm), 1-3/4” (45.5 mm) - see above|
|Gross Capacity:||Up to 1000 lbs. (2268 kg) – custom capacities available|
|Accuracy:||0.5% of full capacity||0.1%-0.25% full capacity|
|Resolution:||0.1 up to 199.9, or 1.0 over 200 lbs. (kg)||0.1 up to 999.9, or 1.0 over 1000 lbs. (kg)|
|4-20mA::||Standard – scale or loop powered||Standard on Channel 1, Optional on Channel 2
– loop powered
|Standard on Channel 1– loop powered
(available for Channels 2 thru 4)
|Level Indication/Relay Contacts:||Optional||(2) Standard||Optional – Up to 4 (as high, low or
control) On one channel or more than
one per channel for a total of 4 set points with relay contract
|Power:||85 VAC to 265 VAC||120VAC,
50/60 Hz, 0.3A
|85VAC to 265VAC|
|Enclosure:||NEMA 4X, UL Approved Enclosure|
|Shipping Weight:||15”x15” = 25 lbs.; 24”x24” = 60 lbs.; 30”x30” = 70 lbs.|
The Gas Cabinet, Dewar & Cylinder Scale must be constructed of all heavy gauge stainless steel. All hardware shall be stainless steel to prevent corrosion. The profile shall not exceed 1.75 inches (44.5 mm) so as not to require a pit or ramp. The load cell must be IP65 approved. Base must be fully electronic with no mechanical lever system to corrode.
Scale shall be a Model 4000SS™ as manufactured by Scaletron Industries Ltd., Plumsteadville, PA.
3-1/2 Digit LCD Indicator: Indicator must be electronic with digital display with characters 0.5 inches high, with 0.1 lb. or 0.1 kg resolution and housed in a NEMA 4X, UL approved enclosure. Indicator is required to have 4-20 mA output selectable as scale powered or loop powered, standard. Indicator must have a knob to set tare weight. Accuracy is 0.5% of full scale, or better.
4-1/2 Digit LED Indicator: Indicator must be electronic with digital display with characters 0.56 inches high and housed in a NEMA 4X, UL approved enclosure. An output of 4-20 mA, 0-20 mA, or -8 to + 12 mA, selectable as scale or loop powered to provide versatility to interface with related equipment, must be standard equipment. Indicator comes with two low level relay contacts, standard. A knob to set tare weights is required. Indicator must be capable of 0.1 lb. or 0.1 kg up to 1000.0 lbs. or kg. Accuracy is 0.5% of full scale, or better.
Model 1020™ 5 Digit LCD Controller: Indicator must be electronic with a two line, backlit alphanumeric digital display with characters 0.56 inches high and housed in a NEMA 4X, UL approved enclosure. Available as single or dual channel and capable of displaying two channels simultaneously. A loop powered programmable output of 4-20 mA and two set points per channel must be standard equipment. Indicator must be capable of 0.1 lb. or 0.1 kg up to 9999.0 lbs. or kg. Accuracy is 0.5% of full scale, or better.
Model 1099™ Chemical Process Controller see separate specification.